Skip to main content
SUBMIT A PRSUBMIT AN ISSUElast edit: Aug 28, 2024

Schedule Key Swap

This guide describes how to use the schedule coldkey swap feature. If you have a reason to believe that your wallet is at-risk as a result of the July 2nd attack, as described in Bittensor Community Update — July 3, 2024, we strongly recommend that you use this feature to transfer your funds to a secure wallet. This feature schedules your funds transfer from an at-risk wallet to a new secure wallet.

Description​

The schedule coldkey swap feature works as follows:

  • The schedule coldkey swap feature enables you to schedule the swapping of old, potentially compromised, coldkey to a new coldkey.
  • When you use this feature, it will not actually swap your TAO funds from the old coldkey to the new coldkey. It will only schedule the swap event.
  • All scheduled coldkey swaps will be executed on-chain. Your scheduled coldkey swap will execute on the mainnet exactly 7200 * 3 blocks (72 hours) after you successfully ran the btcli wallet schedule_coldkey_swap command.
  • The old coldkey you used in the btcli wallet schedule_coldkey_swap will be locked when you schedule the swap. After the 72-hour period is elapsed your original coldkey will be unlocked entirely.
  • This is a free transaction. However, you need a balance of at least 0.1 TAO in your old coldkey, or one TAO staked, to initiate a coldkey swap to your new coldkey.
  • For subnet owners: You do not need any balance in your old coldkey to initiate a coldkey swap to your new coldkey.
  • For validators: If you have 500 TAO or more delegated then you do not need any balance in your old coldkey to initiate a coldkey swap to your new coldkey.
  • For subnet owners: Any subnet ownership from your old coldkey will move to the new coldkey.
  • The delegated stake will be transferred from your old coldkey to the new coldkey.
  • For those who were staking to a validator from their old coldkey, their staking TAO will transfer to the new coldkey.
Do not run this command more than once using the same coldkey

Do not use this feature if​

Do not use this feature if any of the following are true for you:

  • If you have never used btcli, regardless of the Bittensor version, then do not use this feature. Your funds are safe.
  • If you have never used Bittensor version 6.12.2, then do not use this feature. Your funds are safe.
  • If you only used any wallet browser extension or only a wallet application such as below, then your funds are safe:
    • The Bittensor Wallet (for Chrome or iOS)
    • SafeWallet, Talisman, Polkadot Vault, Tensor Wallet, Nova Wallet, polkadot.js
    • Websites that utilize polkadot.js, such as Taostats.io, for staking unstaking
  • If you hold your TAO only on exchanges, then your funds are safe.
  • If you installed Bittensor 6.12.2 not via PyPi package but directly from GitHub source, then do not use this feature. Only the PyPi package of Bittensor 6.12.2 is malicious.

Use this feature only if​

Use this feature only if you downloaded the Bittensor PyPi package for the Bittensor version 6.12.2 and then performed any of the below operations.

Impacted btcli 6.12.2 operations

btcli stake add
btcli stake remove
btcli wallet transfer
btcli root delegate
btcli root undelegate
btcli root set_take
btcli subnet register
reminder

If you installed Bittensor 6.12.2 not via PyPi package but directly from GitHub source, then do not use this feature. Only the PyPi package of Bittensor 6.12.2 is malicious.

Installing the schedule coldkey swap feature​

The schedule coldkey swap feature is available in the Bittensor 7.3.0 version but on the feat/arbitrage-coldkeys branch only. To install it, follow the below steps.

Step 1: Python virtual environment​

First, ensure you are using a Python virtual environment. You can use either Conda or Python to create your virual environment:

Create and activate the virtual environment​

Make sure you create and activate a new virtual environment. Then proceed as below.

Step 2: Install​

You can install the schedule coldkey swap feature in any one of the below two methods.

Method 1: Install directly from the feature branch​

IMPORTANT: Before you proceed, delete any previously installed bittensor directory. Or you can create a new directory and cd into it before running the below commands:

Run the below command to clone the feat/arbitrage-coldkeys branch from the Bittensor 7.3.0 version.

git clone -b feat/arbitrage-coldkeys https://github.com/opentensor/bittensor.git

Next, run the below command to install the feature:

python3 -m pip install bittensor/

This will install the schedule coldkey swap feature. Now skip to Verfy the install section.

Method 2: Install with a script​

You can also use the install script that is in the Bittensor repo.

IMPORTANT: Before you proceed, delete any previously installed bittensor directory. Or you can create a new directory and cd into it before running the below commands:

First, clone the repo:

git clone https://github.com/opentensor/bittensor.git

Next, change to the bittensor directory:

cd bittensor

Switch to the feat/arbitrage-coldkeys branch:

git checkout feat/arbitrage-coldkeys

Finally, run the below command, which will install the feature:

/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/opentensor/bittensor/feat/arbitrage-coldkeys/scripts/install.sh)"
For Ubuntu-Linux users

If you are using Ubuntu-Linux, the script will prompt for sudo access to install all required apt-get packages.

This will install the schedule coldkey swap feature. Next, verify the installation by following the below steps.

Step 3: Verify the install​

Test if you correctly installed the schedule coldkey swap feature by running the below command:

btcli wallet --help

You should see schedule_coldkey_swap and check_coldkey_swap listed in the positional arguments. This confirms that you have successfully installed the schedule coldkey swap feature.

Using the feature​

Syntax​

This is syntax only. See the Example below.

btcli wallet schedule_coldkey_swap [--new_coldkey <new_coldkey_ss58_address>]

This command is used to schedule a swap of your coldkey to a new coldkey. You must specify the new coldkey address. You must first separately create a new coldkey before using it in this command.

The command checks for the validity of the new coldkey and prompts for confirmation before proceeding with the scheduling process.

Example​

On mainnet:

btcli wallet schedule_coldkey_swap

On testnet:

btcli wallet schedule_coldkey_swap --subtensor.network=test

Sample output:

btcli wallet schedule_coldkey_swap
Enter wallet name (default): 
Enter new coldkey SS58 address: 5HM...Srw
⚠If you call this on the same key multiple times, the key will enter arbitration.
Enter password to unlock key: 
Good news. There has been no previous key swap initiated for your coldkey swap.
Do you want to schedule a coldkey swap to: 5HM..Srw? [y/n]: y
Successfully scheduled coldkey swap.

For help​

For help description, run:

btcli wallet schedule_coldkey_swap --help

Checking your scheduled swap status​

To check if your coldkey has been scheduled for swap or placed in arbitration, run the below command. Make sure you have pulled the latest from the feat/arbitrage-coldkeys branch to use the below check_coldkey_swap command:

btcli wallet check_coldkey_swap

Arbitration​

When multiple coldkey swaps involving the same coldkey are scheduled, the swap will not be performed when the mainnet opens. Instead, the swap will enter an arbitration stage, where the Senate votes to determine which coldkey swap should occur.